A multifunctional extraction tank is a device used for extracting, separating, and concentrating substances, widely used in extraction processes in chemical, pharmaceutical, food, and other fields.


A multifunctional extraction tank typically consists of the following main components:
Tank structure: The tank is usually made of corrosion-resistant materials such as stainless steel, which has good sealing performance and high pressure resistance. There is usually a stirring device inside the tank to promote material mixing and mass transfer.
Heating and cooling system: The multifunctional extraction tank is equipped with a heating and cooling system, which can control the temperature as needed. This is very important for certain extraction processes, as it can effectively regulate the reaction rate and product quality.
Concentration and recovery system: During the extraction process, multifunctional extraction tanks usually have the function of concentrating and recovering substances. This can be achieved through heating, evaporation, and other separation techniques to separate the required substances from the extraction solvent and recycle them.

Control system: Multifunctional extraction tanks are usually equipped with advanced automatic control systems for monitoring and adjusting temperature, pressure, mixing speed, and other operating parameters. This can improve the stability and controllability of the production process and ensure safe operation.


The application of multifunctional extraction tanks is very extensive. It can be used to extract active ingredients from natural products, such as herbal medicine extraction and cosmetic raw material extraction. At the same time, it is also widely used in drug production in the pharmaceutical industry, such as extracting antibiotics or vitamins from fermentation broth. In addition, in the food industry, multifunctional extraction cans can also be used to extract food essence, pigments and other functional ingredients.

Multifunctional Extraction Tank

The extraction tank is applied for several process operations,such as water decoction,zwarm-immersion,thermal circumfluence,filtraction and collation and aromatic oil collection of traditional Chinese medicine,propagation and chemical raw material,and recycling of organic solvent.

We provide
Various structure types:tapered type,oblique-cone type,cylinder type,mushroom type,inverted cone type and so on.Various extraction types,such as:static state single-tank extracting,multi-function extracting,(including recovey,recycle and aromatic oil collection devices),dynamic extracting in mixing state(including anti-explosin mixing system),forced circulation dynamic extracting(including circulation pump and circulation pipeline).

Enterprise follows domestic tractional extracting tank manufacturing standard,and improves in the aspects of operating safety,convenience,and GMP regulations conformity.
Deslagging adopting the 3-cylinder rotary self-lock quik open,single-cylinder open and close,two-cylinder rotating and pushing the clamp ring to be clamped tightly,and then the inclined wedge block self-locked.It can prevent the leakage or unhooking incidents due to the unsteady pressure of compressed air.


Special shape of deslagging seal ring is used at the slag door to guarantee the static pressure of liquid column,as the higher static pressure of liquid column,the more reliable sealing performance,then longer serve life.


Mirror polishing in the inner tank layer,circular arc transition at welding joint without bridging,easy to clean.
All-directional CIP cleaning,anti-explosion lamp and sight glass,quick-opening light type sanitary material feeding inlet,mist eliminator and so on,these devices are adopted to support the easy operating.


Extraction Tank structure

Extraction tank


Extraction Tank Technical parameters


Model specification TQ-D-0.5 TQ-D-1.0 TQ-D-2.0 TQ-D-3.0 TQ-D-6.0 TQ-D-8.0 TQ-Z-1.0 TQ-Z-2.0 TQ-Z-3.0 TQ-Z-6.0 TQ-Z-8.0 TQ-Z-10
Volume (L) 750 1200 2300 3400 6400 8500 1200 2300 3200 6300 8500 11000
Design pressure inside tank(Mpa) 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09
Design pressure inside jacket(Mpa) 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
Compressed air pressure(Mpa) 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7
Feeding inlet diameter(mm) 150 200 200 300 350 400 400 400 400 500 500 500
Heating area(m2) 2 3.2 5.3 6.8 8.5 10.5 3 4.7 6 7.5 9.5 12
Condensing area(m2) 5 8 6 10 12 16 6 8 10 12 16 20
Cooling area(m2) 0.5 1 1 1 2 2 1 1 1 2 2 3
Filtration area(m2)





3 3 3 5 5 6
Sludge gate diameter(mm) 800 1000 1200 1500 1700 1900 800 800 800 1000 1000 1000
Energy consumption(kg/h) 145 195 258 300 552 728 245 325 345 645 720 850




Model specification TQ-M-1.0 TQ-M-2.0 TQ-M-3.0 TQ-M-6.0 TQ-M-8.0 TQ-M-10 TQ-T-1.0 TQ-T-2.0 TQ-T-3.0 TQ-Z-6.0 TQ-Z-8.0 TQ-Z-10
Volume (L) 1200 2300 3200 6300 8500 11000 1200 2300 3200 6300 8500 11000
Design pressure inside tank(Mpa) 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09
Design pressure inside jacket(Mpa) 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
Compressed air pressure(Mpa) 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7 0.6~0.7
Feeding inlet diameter(mm) 400 400 400 500 500 500 400 400 400 500 500 500
Heating area(m2) 3 4.7 6 7.5 9.5 12 3 4.7 6 7.5 9.5 12
Condensing area(m2) 6 8 10 12 16 20 6 8 10 12 16 20
Cooling area(m2) 1 1 1 2 2 3 1 1 1 2 2 3
Filtration area(m2) 3 3 3 5 5 6 3 3 3 5 5 6
Sludge gate diameter(mm) 800 800 800 1000 1000 1000 800 1000 1000 1000 1000 1000
Energy consumption(kg/h) 245 325 345 645 720 850 245 325 345 645 720 850


Overall, a multifunctional extraction tank is a flexible and reliable device that can be widely used for extracting, separating, and concentrating substances in different fields, providing efficient, controllable, and sustainable solutions for the production process.



Feedback form contact with us
Product Catalog